Film separant (abherent)

Uses:

It is specially used for rubber sheet isolation to prevent adhesion between unvulcanized rubber and compounded sheet. It has good compatibility with rubber, does not affect the subsequent vulcanization speed of rubber and the physical and mechanical properties of the product, and can effectively prevent the adhesion of raw rubber. Suitable for natural rubber, synthetic rubber elastomers, such as rubber soles, tapes, rubber tubes, tires, seals, SBS granulation and other products production factories.
 

Composition:

With calcium stearate and surfactant as the main components, the homogeneous dispersion formed by dispersing is environmentally friendly and does not contain nonylphenol.

Specification: LY-G30

Place of Origin: Ningbo, Zhejiang
 

Product Image:

Technical Index:

Instructions for use:

Dilute this product with water in an appropriate proportion, and apply it to the surface of the kneading film by dipping or spraying. After drying, a film is formed to prevent the adhesion between the films and has a good isolation effect.

It can endow the rubber surface with good smoothness. It can be used after being diluted with water. There will be no problems such as uneven smearing on the surface of the film or powder flying everywhere, causing pollution to the working environment and harming human health. It is non-corrosive.

Packaging and Storage:

This product is packed in 50L, 120L, 200L, 1000L plastic drums or plastic-lined iron drums.

The product should be stored in a well-ventilated warehouse and should avoid freezing or long-term sunlight exposure.

Under the condition of 4℃~40℃, the shelf life is 12 months.

Tel:  159 5884 9949

Ningbo Huizhen New Material Co., Ltd.